1-1/2" diameter (�38) grab bar with snap-on flange covers for concealed mounting shall be type 304 stainless steel alloy 18-8. Tubing shall be 1-1/2" diameter (�38) x 18 gauge (0.048") (1.2). Snap-on cover shall be 22 gauge (0.03") (0.8). Flange shall be 1/8" (3) thick and shall be heliarc welded to tubing with a continuous concealed bead. End flanges shall have two (2) 5/16" diameter (�7.5) mounting holes. Center posts (if any) shall have (2) keyhole slots to ease installation access. All exposed surfaces shall have a satin finish and shall be protected during shipment with a plastic bag.

• In compliance with strength requirements of ADA guidelines
• Bars fabricated of satin finish 18 gauge type 304 stainless steel tubing
• Concealed flange is 3 1/8 in OD, 1/8 in with two screw holes and three locking dimples and is 1/8 in thick, type 304 stainless steel
• Cover is type 304 stainless steel with a satin finish and 22 gauge, 3-3/16 in (81 mm) diameter
• Cover snapes over mounting flange dimples to conceal screws
• Mandrell bending process ensures uniform bar diameters
• Heliarc welding forms a single structural unit