Featured item is 48", front mount.  Special closure plate for security applications. 

Security Grab Bar shall be fabricated of alloy 18-8 stainless steel, type 304. All exposed surfaces shall have No 4 satin finish. Tubing shall be 1-1/2" diameter with 16 gauge wall. Flanges shall be 1/8" thick and shall be completely welded to tube end. Each flange shall have three (3) mounting holes to accommodate 1/4" diameter screws (by others). Closure plate welded on bottom shall be 12 gauge alloy 18-8 stainless steel, type 304 and shall fit closely to flanges and a straight line between rear face mounting surface of flanges.

Strength:
ASI grab bars are designed to meet and exceed ADA Guidelines, that fabricated product shall be of adequate strength to support a load of 250 pounds. Mounting to the wall is a critical part of the system to meet this requirement. To withstand the shear, tension or pullout and torsion loads generated by the maximum loading, the fastener system must be adequately sized. The product is capable of holding in excess of 1350 lbs when properly installed.