ASI - PROFILE DRYER SATIN - 10-0185-93

Surface mounted sensing hand dryer with stainless steel, satin finish.  Dryer automatically shuts off after time-out when user removes hands from sensor zone.

Features:

• Quick drying - under 25 seconds
• No touch energy efficient operation
• Steel cover with porcelain enamel finish (except for stainless steel)
• Self adjusting time-out and fail-safe off protection controlled by a microprocessor that detects and rejects false signals and automatically self calibrates to provide uniform sensitivity over its entire life span.
• Conforms to ADA
• 11-1⁄4" H x 15" W x 4" D (275mm x 370mm x 100)

Specification:

• Surface Mounted Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, 16 gauge (.063", 1.6mm) thick drawn steel or type 304 stainless steel and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel on steel, or bright or satin finish on stainless steel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for (10) years.

Mechanical Information:

• Volts:100-240VAC; 50/60 
• Amps: 17.6 at 120 VAC 
• Watts: 2020
• Motor:  1/4HP, 7500 RPM Brush type dual ball bearings
• Air Flow: 185 CFM
• Heating Element: 2020 Watt Nichrome wire with auto reset circuit breaker @ 240VAC
• Heat Temp: 149° F (65 degrees C)